News

Excessive Workshop Noise? How to Carry Out Sound Insulation and Noise Reduction?

2026-09-22 0 Leave me a message

Noise issues of industrial buildings are mainly tackled from three levels: noise source, transmission path and receiving end. Steel features good sound conductivity, so it shall be matched with proper enclosure systems to reduce the noise transmission efficiency of industrial equipment.

Noise in steel structure workshops mainly comes from production equipment, structural-borne vibration noise and reverberation noise. Source control measures include selecting low-noise equipment, installing sound insulation enclosures (outer galvanized steel sheet + middle damping glue + inner nano sound-absorbing cotton) and carrying out vibration damping treatment. To block transmission paths, appropriate wall panel systems shall be adopted to eliminate reverberation on roofs and ceilings and restrain structural resonance. Erecting sound barriers and isolation fences serves as the final protection for the receiving end. Comprehensive consideration of the three dimensions and adoption of a well-matched solution can achieve cost-effective and high-efficiency noise reduction.

 

Workshop

 

The enclosure system of steel structure workshops is the core component for sound insulation and noise reduction. Systematic measures can be implemented in four parts: wall panels, roof panels, partitions, doors & windows and all gaps. Composite sound insulation structures formed by multi-layer and diversified material combinations can greatly weaken noise penetration.

 

Wall System

The wall system occupies the largest area of the entire enclosure. High-performance sound insulation solutions usually adopt composite structures made of sandwich wall panels: 0.6mm aluminum-zinc coated steel sheet + 2mm damping sound insulation felt + 100mm high-density centrifugal glass wool, achieving a sound insulation performance of over 45 decibels.

The double-layer wall panel system is widely applied in practical projects, consisting of external precast concrete strip panels, intermediate air layer filled with sound-absorbing materials, and internal light steel keel gypsum boards, which provides 35 to 45 decibels of sound insulation.

Vibration isolation trenches with additional damping layers can effectively cut down sound transmission through the workshop foundation.

 

Workshop

 

Roof Sound Insulation System

The roof system mainly addresses airborne noise from outside and internal reverberation, with two solutions available: composite roof structure and suspended space absorbers.

The composite roof structure combines profiled steel roof sheets, thermal and acoustic insulation layers and suspended ceilings to form an air buffer layer for noise blocking.

Space absorbers refer to perforated aluminum panels filled with 64kg/m³ superfine glass wool, evenly hung beneath main roof beams to dissipate reverberation inside the workshop.

 

Workshop

 

Internal Partition Sound Insulation System

This is a noise reduction solution by installing lightweight sound-insulating partitions in high-noise zones. Light steel keel partition, the mainstream option for steel structure workshop partitions, is composed of cold-formed galvanized light steel keel frame, face boards on both sides (paper-faced gypsum board, fiber cement pressure board or calcium silicate board), and sound-absorbing materials filled inside the cavity.

 

Workshop

 

Door, Window and Gap Sealing

Attention to details is critical to achieving satisfactory sound insulation and noise reduction performance. For steel structure workshops, sound sealing treatment must be carried out on all doors, windows and gaps. Double-layer hollow sound-insulating windows and 50mm-thick industrial soundproof doors can be adopted to deliver comprehensive and optimized noise isolation results.

 

Workshop

 

The design of sound insulation and noise reduction requires overall planning to eliminate the occurrence of acoustic bridges and select materials rationally, so as to achieve efficient and stable noise control from the noise source to the receiving end.

The sound insulation scheme of the enclosure system is an important component of steel structure buildings and the primary solution for noise control in steel workshops. By adopting a matched enclosure system, the structural performance and building functions can work efficiently together to build ideal modern industrial buildings.

Related News
Leave me a message
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept