Steel Frame Highway Toll Station Construction

Steel frame highway toll station construction refers to a toll facility for highways constructed with steel as the main load-bearing structure. It is currently the most common architectural form for toll stations on highways and bridges.

Structural composition

● Lower support

The columns are made of H-shaped steel columns or round tube columns, which can support the huge roof.

● Upper ceiling

The ceiling section usually adopts a grid structure or a truss structure. Toll stations usually need to span multiple lanes. The grid and truss can support a stable large-span structure.

● Roof and decoration

After the steel structure framework is completed, corrugated metal sheets need to be laid. The purpose is to install lighting ceilings, provide shading, and protect from rain.

● Auxiliary facilities

Including installation and connection components for toll booths, traffic signals, lane indicators, and monitoring equipment, etc.

If you are looking for a Chinese supplier and manufacturer capable of customizing toll station buildings, please feel free to contact us. We will provide you with a satisfactory quotation.

Parameter (Specification)

Why choose EIHE Steel Structure？

1. An 80,000-square-meter production workshop with an annual output capacity of over 100,000 tons.

2. Over 20 years of experience in steel structure projects

3. Close to the port, the time cost and transportation cost are lower.

FAQ

1. Can the Steel frame highway toll station construction withstand the passage of large vehicles?

Our overweight load steel frame can bear a ground load capacity of over 80 tons for the columns, ensuring the structural stability of the building.

2. Why has steel structure become the mainstream form for highway toll stations?

Because steel structure can be prefabricated in the factory and does not require on-site construction. It not only has a fast production speed but also a fast installation speed, which can save costs.

3. How are the toll booths, traffic lights, surveillance equipment, etc. fixed to the steel structure?

During the design of the steel structure, connection components will be pre-arranged. For example, steel plate flanges, sleeves or C-shaped channel steel will be welded at the corresponding positions on the steel columns or truss bottom chords.